ROGERS, Minn. — Brave will be debuting four new units, a bed sculptor, brush cutter, edger and wire installer. All the new products are professional grade and powered by Honda engines.
The bed sculptor (BRPT9SH) defines the boundaries between a flower bed and your lawn. It has a tungsten carbide landscaping rotor available in a 3-, 4- or 5-inch size. Optional, interchangeable trenching rotors are also available. The bed sculptor operates with a double belt and pulley drive system and is powered by a Honda GX270 commercial engine.
The brush cutter (BRPBC26HE) has a 26-inch cutting width and can handle saplings up to 3-inches in diameter. It features a hydrostatic drive system with 1 forward and 1 reverse drive speed. The brush cutter is powered by a Honda GX390 commercial engine.
The edger (BRPE109H) has a blade size up to 10-inches and a maximum curb height of 10-inches. It operates with a double belt drive system and features steel wheels with 9-inch pneumatic tires. The edger is powered by a Honda GX160 commercial engine.
The wire installer (BRPT4H) is perfect for installing low voltage wire like invisible dog fences. It digs a 2-, 3- or 4-inch trench, places the wire and recovers it with dirt at a rate of up to 25-feet per minute. The wire installer operates with a double belt drive system and features a tungsten carbide rotor. It is powered by a Honda GX160 commercial engine.